Penerangan Produk
NM Coupling, NM Rubber Coupling Elements, NM Rubber Spider
| Bahan: | NBR, CSM/SBR | Warna: | Hitam |
| Tensile Strength: | 12Mpa | Kekerasan: | 80shore A |
| Pemanjangan: | 350% | Ketumpatan: | 1.25g/cm3 |
| Saiz: | NM50, NM67, NM82, NM97, NM112, NM128, NM148, NM168, NM194, NM214, NM240, NM265 |
Gandingan NM
Jenis NM dihasilkan dengan tepat oleh getah sintetik yang direka khas dengan 2 badan besi tuang yang serupa
Bebibir besi tuang:
Designed not only for the power transmission but also for protection of flexible rubber
Getah fleksibel: Aplikasi untuk pam, kipas, pemampat, kenderaan, peralatan pengangkutan, pembina, pengadun simen, traktor, mesin transmisi, mesin kerja logam, penggelek dan semua transmisi lain
Diperbuat daripada teras getah dan keluli yang dimasukkan ke dalam gigi untuk memberikan ketahanan dan prestasi gandingan yang sangat baik
Ciri-ciri:
Penggunaan yang ekonomik dan praktikal
Operasi yang senyap dan lancar
Pemasangan dan penyelenggaraan yang mudah
Tersedia untuk mesin dengan tork tinggi dan operasi sekejap-sekejap
Ciri-ciri getah sintetik: keanjalan dan rintangan yang betul terhadap redaman, minyak, asid dan alkali
Spesifikasi:
1: dengan sijil CE
2: pengesanan penuh kualiti sebelum penghantaran
3: OEM is welcomed
4: pengalaman yang kaya dalam pemutus ketepatan
bahan: CSM/SBR, NBR
warna: hitam.
permukaan: licin
kekuatan tegangan: 12Mpa
kekerasan: 80Shore A
pemanjangan: 400%
ketumpatan: 1.25g/cm3
kesan keanjalan: >25%
kekuatan koyakan: 35KN/m
suhu kerja: 100oC
saiz piawai:
NM50, NM67, NM82, NM97, NM112, NM128, NM148, NM168, NM194, NM214, NM240, NM265
Ciri fizikal: dibuat melalui suntikan dengan poliester atau acuan CSM/SBR berkualiti tinggi. Ia direka bentuk dan khas untuk semua jenis gandingan aci logam dengan prestasi yang sangat baik iaitu kekuatan tegangan tinggi, tahan haus tinggi, daya tahan elastik tinggi, tahan air, tahan minyak dan daya tahan lesu yang sangat baik, tahan hentaman tinggi dan sebagainya. Kami mempunyai set lengkap acuan dan membekalkan pelbagai jenis gandingan siri GR, GS, MT, Hb, HRC, L, NM dan Gear J dengan kualiti tinggi dan pengalaman yang cemerlang. Digunakan untuk semua jenis gandingan aci logam perindustrian.
Spesifikasi:
Bahan: poliester, CSM/SBR
color: yellow, red, purple, green, black etc.
permukaan: licin
kekuatan tegangan: 12-55Mpa
kekerasan: 80-98Shore A
pemanjangan: 400%-650%
ketumpatan: 1.25g/cm3
kesan keanjalan: >25%
kekuatan koyakan: 35-155KN/m
Kehilangan lelasan akron: <0.05cm3/1.61km
set mampatan (22j*70oC): <10%
suhu kerja: 120oC
saiz standard untuk gandingan poliuretana:
GR14, GR19, GR24, GR28, GR38, GR42, GR48, GR55, GR65, GR75, GR90, GR100, GR110, GR125, GR140, GR160, GR180
MT1, MT2, MT3, MT4, MT5, MT6, MT7, MT8, MT9, MT10, MT11, MT12, MT13
HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280
L35, L50, L70, L75, L90/95, L99/100, L110, L150, L190, L225, L276
FALK-R 10R, 20R, 30R, 40R, 50R, 60R, 70R, 80R
saiz standard untuk gandingan getah:
Hb80, Hb95, Hb110, Hb125, Hb140, Hb160, Hb180, Hb200, Hb240, Hb280, Hb315
HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280
L35, L50, L70, L75, L90/95, L99/100, L110, L150, L190, L225
NM50, NM67, NM82, NM97, NM112, NM128, NM148, NM168, NM194, NM214, NM240, NM265
Gear 3J, 4J, 5J, 6J, 7J, 8J, 9J, 10J, 11J
acuan binaan saiz khas mengikut lukisan pembeli
***apabila anda membuat pertanyaan, sila sahkan nombor dan kuantiti produk***
/* 22 Januari 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/)&
| Piawai: | DIN, ANSI, GB |
|---|---|
| Bahan: | Nr+SBR |
| Connection: | Flange |
| Surface Treatment: | Nothing |
| Head Type: | Round |
| Jenis: | Nm Type |
| Sampel: |
US$ 10/Keping
1 Keping (Pesanan Minimum) | |
|---|
| Penyesuaian: |
Tersedia
| Permintaan Tersuai |
|---|
Bolehkah gandingan fleksibel menampung tork tinggi dan aplikasi berkelajuan tinggi?
Ya, gandingan fleksibel boleh menampung kedua-dua aplikasi tork tinggi dan berkelajuan tinggi, tetapi kesesuaiannya bergantung pada reka bentuk dan bahan khusus gandingan fleksibel. Jenis gandingan fleksibel yang berbeza mempunyai kapasiti tork dan kelajuan yang berbeza-beza, dan adalah penting untuk memilih jenis gandingan yang betul berdasarkan keperluan aplikasi.
Aplikasi Tork Tinggi:
Sesetengah gandingan fleksibel, seperti gandingan gear dan gandingan cakera, direka bentuk untuk mengendalikan tahap tork yang tinggi. Gandingan gear terdiri daripada hab bergigi yang bercantum antara satu sama lain, memberikan transmisi tork yang teguh dan cekap. Ia biasanya digunakan dalam aplikasi perindustrian tugas berat, seperti kilang keluli, peralatan perlombongan dan loji penjanaan kuasa, di mana beban tork yang tinggi lazimnya berlaku.
Gandingan cakera juga sesuai untuk aplikasi tork tinggi. Ia menggunakan satu siri cakera logam fleksibel yang boleh mengendalikan tork yang ketara sambil mengimbangi ketidaksejajaran. Gandingan cakera sering digunakan dalam jentera berkelajuan tinggi dan aplikasi kritikal di mana penghantaran tork yang tepat adalah penting.
Aplikasi Berkelajuan Tinggi:
Gandingan fleksibel juga boleh digunakan dalam aplikasi berkelajuan tinggi. Contohnya, gandingan cakera tertentu, gandingan elastomer dan gandingan grid mampu mengendalikan kelajuan putaran yang tinggi. Gandingan ini mempunyai inersia yang rendah, yang bermaksud ia boleh bertindak balas dengan cepat terhadap perubahan kelajuan dan menyediakan penghantaran kuasa yang cekap pada RPM tinggi.
Gandingan elastomer, seperti gandingan rahang dan gandingan tayar, biasanya digunakan dalam pelbagai aplikasi perindustrian, termasuk pam, pemampat dan kipas, yang memerlukan tork dan kelajuan yang tinggi. Gandingan ini menawarkan fleksibiliti dan sifat redaman yang baik, menjadikannya sesuai untuk aplikasi dengan variasi dan getaran berkelajuan tinggi.
Pertimbangan:
Apabila memilih gandingan fleksibel untuk tork tinggi dan aplikasi berkelajuan tinggi, beberapa faktor perlu dipertimbangkan:
- Penarafan tork dan kelajuan yang disediakan oleh pengeluar gandingan perlu diperiksa untuk memastikan ia memenuhi atau melebihi keperluan aplikasi.
- Reka bentuk dan bahan gandingan hendaklah sesuai untuk keadaan operasi tertentu, termasuk suhu, persekitaran dan potensi pendedahan kepada bahan menghakis.
- Penjajaran dan pemasangan gandingan yang betul adalah penting untuk memastikan prestasi optimum dan mencegah haus pramatang.
- Dalam sesetengah kes, mungkin perlu menggunakan komponen tambahan, seperti pengehad tork atau pengurang kelajuan, untuk melindungi gandingan dan peralatan yang disambungkan daripada beban berlebihan atau turun naik kelajuan.
Kesimpulannya, gandingan fleksibel sememangnya boleh menampung tork tinggi dan aplikasi berkelajuan tinggi, tetapi jenis gandingan yang sesuai dan pemilihan yang betul adalah penting untuk memastikan prestasi yang andal dan cekap dalam keadaan yang mencabar ini.
How does a flexible coupling impact the overall reliability of connected equipment?
A flexible coupling significantly impacts the overall reliability of connected equipment in several ways:
- Pampasan Salah Jajaran: Flexible couplings can accommodate both angular and parallel misalignment between connected shafts. By allowing for misalignment, the coupling reduces the stress and wear on bearings, seals, and other rotating components. This feature prevents premature failure of these components, contributing to improved reliability and extended equipment lifespan.
- Redaman Getaran: Flexible couplings possess inherent damping properties due to their elastomeric or flexible elements. These elements absorb and dissipate vibrations generated during the operation of machinery. By dampening vibrations, the coupling protects the connected equipment from excessive oscillations, reducing fatigue and preventing mechanical failures. This enhanced vibration control increases the reliability of the system.
- Shock Load Absorption: In applications with sudden load variations or shock loads, such as in heavy machinery or high-speed equipment, a flexible coupling acts as a shock absorber. It can absorb and dissipate the impact energy, protecting the machinery from damage caused by sudden loads. The ability to absorb shock loads contributes to the overall reliability of the connected equipment.
- Reduced Wear and Tear: The flexibility of the coupling minimizes stress and wear on rotating equipment. It allows for slight movements and misalignments, reducing friction and stress on bearings and other critical components. This reduction in wear and tear lowers the frequency of maintenance and replacement, increasing the overall reliability of the equipment.
- Pampasan untuk Pengembangan Terma: Temperature changes in machinery can lead to thermal expansion or contraction of shafts. A flexible coupling can compensate for these thermal effects, ensuring that the machinery remains properly aligned even as temperature conditions fluctuate. This compensation prevents binding and misalignment, promoting reliable performance.
- Protection Against Overloads: Flexible couplings help protect connected equipment from overloads and torsional vibrations. They act as a mechanical fuse, disconnecting the driveline when an overload occurs, thus preventing damage to expensive machinery. This safety feature enhances the overall reliability and reduces the risk of catastrophic failures.
- Easy Maintenance and Alignment: Flexible couplings are designed for easy installation and alignment. This feature simplifies maintenance procedures, making it easier to inspect and replace couplings when necessary. Properly aligned couplings lead to improved equipment performance and longevity, enhancing overall reliability.
By compensating for misalignment, damping vibrations, absorbing shock loads, reducing wear and tear, and providing other protective features, a flexible coupling significantly improves the reliability of connected equipment. It extends the lifespan of critical components, minimizes downtime, and ensures smooth and efficient operation, making it a valuable component in various industrial applications.
How do you select the appropriate flexible coupling for a specific application?
Choosing the right flexible coupling for a specific application requires careful consideration of various factors to ensure optimal performance, reliability, and longevity. Here are the key steps to select the appropriate flexible coupling:
- Application Requirements: Understand the specific requirements of the application, including torque and speed specifications, misalignment conditions, operating environment (e.g., temperature, humidity, and presence of corrosive substances), and space limitations.
- Torque Capacity: Determine the maximum torque that the coupling needs to transmit. Choose a flexible coupling with a torque rating that exceeds the application’s requirements to ensure a safety margin and prevent premature failure.
- Pampasan Salah Jajaran: Consider the type and magnitude of misalignment that the coupling needs to accommodate. Different coupling designs offer varying degrees of misalignment compensation. Select a coupling that can handle the expected misalignment in the system.
- Redaman Getaran: If the application involves significant vibrations, choose a flexible coupling with good damping properties to reduce vibration transmission to connected equipment and improve system stability.
- Environmental Factors: Take into account the environmental conditions in which the coupling will operate. For harsh environments, consider couplings made from corrosion-resistant materials.
- Torsional Stiffness: Depending on the application’s requirements, decide on the desired torsional stiffness of the coupling. Some applications may require high torsional stiffness for precise motion control, while others may benefit from a more flexible coupling for shock absorption.
- Cost and Life-Cycle Considerations: Evaluate the overall cost-effectiveness of the coupling over its expected life cycle. Consider factors such as initial cost, maintenance requirements, and potential downtime costs associated with coupling replacement.
- Manufacturer Recommendations: Consult coupling manufacturers and their technical specifications to ensure the selected coupling is suitable for the intended application.
- Installation and Maintenance: Ensure that the selected flexible coupling is compatible with the equipment and shaft sizes. Follow the manufacturer’s installation guidelines and recommended maintenance practices to maximize the coupling’s performance and longevity.
By following these steps and carefully evaluating the application’s requirements, you can select the most appropriate flexible coupling for your specific needs. The right coupling choice will lead to improved system performance, reduced wear on equipment, and enhanced overall reliability in various mechanical systems and rotating machinery.
editor by CX 2024-03-27
