Produktbeskrivelse
Type NM Rubber Coupling Made with Black CSM + SBR Rubber (3A2006)
| Materiale: | NBR, CSM/SBR | Color: | Black |
| Tensile Strength: | 12Mpa | Hardness: | 80shore A |
| Elongation: | 350% | Density: | 1.25g/cm3 |
| Size: | NM50, NM67, NM82, NM97, NM112, NM128, NM148, NM168, NM194, NM214, NM240, NM265 |
NM50-265 coupling , rubber coupling , polyurethane coupling for pumps, fans, compressors, vehicles, transporting equipme
NM-kobling
NM type is precisely produced by a special designed synthetic rubber with 2 similar bodies of cast iron
Cast iron flanges:
Designed not only for the power transmission but also for protection of flexible rubber
Flexible rubber:Applications for pumps, fans, compressors, vehicles, transporting equipments, constructors, cement mixers, tractors, transmission machines, metal working machines, rollers and all other transmissions
Made of rubber and steel cores are inserted in the teeth so as to provide excellent durability and performance of coupling
Features:
Economical and practical using
Quiet and smooth operation
Easy installation and maintenance
Available to machines with high torque and intermittent operation
Characteristics of the synthetic rubber: proper elasticity and resistance to damping, oil, acids and alkalie
Specifications:
1: with CE certificate
2: full detection of quality before delivery
3: OEM is welcomed
4: rich experience in precision casting
material: CSM/SBR, NBR
color: black.
surface: smooth
tensile strength: 12Mpa
hardness: 80Shore A
elongation: 400%
density: 1.25g/cm3
elasticity impact: >25%
tear strength: 35KN/m
working temperature: 100oC
standard size:
NM50, NM67, NM82, NM97, NM112, NM128, NM148, NM168, NM194, NM214, NM240, NM265
Physical character: made by injection with high quality polyester or mould CSM/SBR. It is designing and special for all kinds of metal shaft coupling with very good performance of high tensile strength, high wear resistant, high elastic resilience, water resistant, oil resistant and excellent fatigue resilience, high impact resistant etc. We have full sets moulds and supply full range of GR, GS, MT, Hb, HRC, L, NM and Gear J series couplings with high quality and excellent experience. Apply to all kinds of industrial metal shaft coupling.
Specifications:
material: polyester, CSM/SBR
color: yellow, red, purple, green, black etc.
surface: smooth
tensile strength: 12-55Mpa
hardness: 80-98Shore A
elongation: 400%-650%
density: 1.25g/cm3
elasticity impact: >25%
tear strength: 35-155KN/m
CHINAMFG abrasion loss: <0.05cm3/1.61km
compression set (22h*70oC): <10%
working temperature: 120oC
standard size for polyurethane coupling:
GR14, GR19, GR24, GR28, GR38, GR42, GR48, GR55, GR65, GR75, GR90, GR100, GR110, GR125, GR140, GR160, GR180
MT1, MT2, MT3, MT4, MT5, MT6, MT7, MT8, MT9, MT10, MT11, MT12, MT13
HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280
L35, L50, L70, L75, L90/95, L99/100, L110, L150, L190, L225, L276
FALK-R 10R, 20R, 30R, 40R, 50R, 60R, 70R, 80R
standard size for rubber coupling:
Hb80, Hb95, Hb110, Hb125, Hb140, Hb160, Hb180, Hb200, Hb240, Hb280, Hb315
HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280
L35, L50, L70, L75, L90/95, L99/100, L110, L150, L190, L225
NM50, NM67, NM82, NM97, NM112, NM128, NM148, NM168, NM194, NM214, NM240, NM265
Gear 3J, 4J, 5J, 6J, 7J, 8J, 9J, 10J, 11J
special size build molding according to the buyer’s drawings
***when you enquiry, pls confirm product’s number and quantity***
/* 22. januar 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))
| Standard: | DIN, ANSI, GB |
|---|---|
| Materiale: | Csm+SBR |
| Connection: | Flange |
| Surface Treatment: | Nothing |
| Head Type: | Round |
| Type: | Nm Type |
| Prøver: |
US$ 10/Piece
1 stk (min. bestilling) | |
|---|
| Tilpasning: |
Tilgjengelig
| Tilpasset forespørsel |
|---|
Can flexible couplings accommodate high torque and high-speed applications?
Yes, flexible couplings can accommodate both high torque and high-speed applications, but the suitability depends on the specific design and material of the flexible coupling. Different types of flexible couplings have varying torque and speed capacities, and it’s crucial to select the right type of coupling based on the application requirements.
High Torque Applications:
Some flexible couplings, such as gear couplings and disc couplings, are designed to handle high torque levels. Gear couplings consist of toothed hubs that mesh with each other, providing a robust and efficient torque transmission. They are commonly used in heavy-duty industrial applications, such as steel mills, mining equipment, and power generation plants, where high torque loads are prevalent.
Disc couplings are also suitable for high torque applications. They use a series of flexible metal discs that can handle significant torque while compensating for misalignment. Disc couplings are often used in high-speed machinery and critical applications where precise torque transmission is essential.
High-Speed Applications:
Flexible couplings can also be used in high-speed applications. For instance, certain disc couplings, elastomeric couplings, and grid couplings are capable of handling high rotational speeds. These couplings have low inertia, which means they can respond quickly to changes in speed and provide efficient power transmission at high RPMs.
Elastomeric couplings, such as jaw couplings and tire couplings, are commonly used in various industrial applications, including pumps, compressors, and fans, where both torque and speed requirements are high. They offer good flexibility and damping properties, making them suitable for applications with high-speed variations and vibrations.
Considerations:
When selecting a flexible coupling for high torque and high-speed applications, several factors should be considered:
- The torque and speed ratings provided by the coupling manufacturer should be checked to ensure they meet or exceed the application’s requirements.
- The design and materials of the coupling should be suitable for the specific operating conditions, including temperature, environment, and potential exposure to corrosive substances.
- Proper alignment and installation of the coupling are critical to ensure optimal performance and prevent premature wear.
- In some cases, it may be necessary to use additional components, such as torque limiters or speed reducers, to protect the coupling and the connected equipment from excessive loads or speed fluctuations.
In conclusion, flexible couplings can indeed accommodate high torque and high-speed applications, but the appropriate coupling type and proper selection are essential to ensure reliable and efficient performance in these demanding conditions.
Hvordan påvirker en fleksibel kobling den generelle påliteligheten til tilkoblet utstyr?
En fleksibel kobling påvirker den generelle påliteligheten til tilkoblet utstyr betydelig på flere måter:
- Kompensasjon for feiljustering: Fleksible koblinger kan håndtere både vinkelmessig og parallell feiljustering mellom tilkoblede aksler. Ved å tillate feiljustering reduserer koblingen belastning og slitasje på lagre, tetninger og andre roterende komponenter. Denne funksjonen forhindrer for tidlig svikt i disse komponentene, noe som bidrar til forbedret pålitelighet og forlenget levetid for utstyr.
- Vibrasjonsdemping: Fleksible koblinger har iboende dempende egenskaper på grunn av deres elastomere eller fleksible elementer. Disse elementene absorberer og avleder vibrasjoner som genereres under drift av maskiner. Ved å dempe vibrasjoner beskytter koblingen det tilkoblede utstyret mot overdreven svingning, noe som reduserer utmatting og forhindrer mekaniske feil. Denne forbedrede vibrasjonskontrollen øker systemets pålitelighet.
- Støtdemping: I applikasjoner med plutselige lastvariasjoner eller sjokkbelastninger, som i tunge maskiner eller høyhastighetsutstyr, fungerer en fleksibel kobling som en støtdemper. Den kan absorbere og avlede støtenergien, og beskytte maskineriet mot skader forårsaket av plutselige belastninger. Evnen til å absorbere sjokkbelastninger bidrar til den generelle påliteligheten til det tilkoblede utstyret.
- Redusert slitasje: Fleksibiliteten til koblingen minimerer belastning og slitasje på roterende utstyr. Den tillater små bevegelser og feiljusteringer, noe som reduserer friksjon og belastning på lagre og andre kritiske komponenter. Denne reduksjonen i slitasje reduserer hyppigheten av vedlikehold og utskifting, noe som øker utstyrets generelle pålitelighet.
- Kompensasjon for termisk ekspansjon: Temperaturendringer i maskiner kan føre til termisk utvidelse eller sammentrekning av aksler. En fleksibel kobling kan kompensere for disse termiske effektene, og sikre at maskineriet forblir riktig justert selv når temperaturforholdene svinger. Denne kompensasjonen forhindrer binding og feiljustering, noe som fremmer pålitelig ytelse.
- Beskyttelse mot overbelastning: Fleksible koblinger bidrar til å beskytte tilkoblet utstyr mot overbelastning og torsjonsvibrasjoner. De fungerer som en mekanisk sikring som kobler fra drivlinjen når det oppstår overbelastning, og dermed forhindrer skade på dyrt maskineri. Denne sikkerhetsfunksjonen forbedrer den generelle påliteligheten og reduserer risikoen for katastrofale feil.
- Enkel vedlikehold og justering: Fleksible koblinger er utformet for enkel installasjon og justering. Denne funksjonen forenkler vedlikeholdsprosedyrer, noe som gjør det enklere å inspisere og bytte ut koblinger når det er nødvendig. Riktig justerte koblinger fører til forbedret utstyrsytelse og levetid, noe som øker den generelle påliteligheten.
Ved å kompensere for feiljustering, dempe vibrasjoner, absorbere støtbelastninger, redusere slitasje og gi andre beskyttende funksjoner, forbedrer en fleksibel kobling påliteligheten til tilkoblet utstyr betydelig. Den forlenger levetiden til kritiske komponenter, minimerer nedetid og sikrer jevn og effektiv drift, noe som gjør den til en verdifull komponent i ulike industrielle applikasjoner.
Can flexible couplings handle misalignment between shafts?
Yes, flexible couplings are specifically designed to handle misalignment between shafts in rotating machinery and mechanical systems. Misalignment can occur due to various factors, including installation errors, thermal expansion, manufacturing tolerances, or shaft deflection during operation.
Flexible couplings offer the ability to compensate for different types of misalignment, including:
- Angular Misalignment: When the shafts are not collinear and have an angular offset, flexible couplings can accommodate this misalignment by flexing or twisting, allowing the two shafts to remain connected while transmitting torque smoothly.
- Parallel Misalignment: Parallel misalignment occurs when the two shafts are not perfectly aligned along their axes. Flexible couplings can adjust to this misalignment, ensuring that the shafts remain connected and capable of transmitting power efficiently.
- Axial Misalignment: Axial misalignment, also known as end float or axial displacement, refers to the relative axial movement of the two shafts. Some flexible coupling designs can accommodate axial misalignment, allowing for slight axial movements without disengaging the coupling.
The ability of flexible couplings to handle misalignment is essential in preventing premature wear and failure of the connected equipment. By compensating for misalignment, flexible couplings reduce the stress on the shafts, bearings, and seals, extending the service life of these components and improving overall system reliability.
It is crucial to select the appropriate type of flexible coupling based on the specific misalignment requirements of the application. Different coupling designs offer varying degrees of misalignment compensation, and the choice depends on factors such as the magnitude and type of misalignment, the torque requirements, and the operating environment.
In summary, flexible couplings play a vital role in handling misalignment between shafts, ensuring efficient power transmission and protecting mechanical systems from the adverse effects of misalignment. Their ability to accommodate misalignment makes them indispensable components in various industrial, automotive, aerospace, and marine applications.
editor by CX 2024-04-09
