Product Description
| Material | stainless steel 304 316 | |
| Standard | NPT,BSP,BSPT | |
| Size | 1/2″,3/4″,1″,11/4″,11/2″,2″,21/2″,3″,4″ | |
| Applications | Suitable for Pipe lines connect of water, steam, air, gas, oil and so on. | |
| Buyer’s drawings or designs are available. | ||
| Gasket | Nitrile butadiene, silicone, fluorine rubber | |
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.
Q:What is the payment team?
A:L/C at sight ,T/T etc.
Q: May I visit your factory?
A:Sure,welcome any time.
| Standard: | BSPT/Bsp/NPT |
|---|---|
| Material: | Stainless Steel |
| Connection: | Female |
| Surface Treatment: | Without Treatment |
| Head Type: | Round |
| Transport Package: | Carton, Wooden Case |
| Samples: |
US$ 3/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What Is a Coupling?
A coupling is a mechanical device that links two shafts together and transmits power. Its purpose is to join rotating equipment while permitting a small amount of misalignment or end movement. Couplings come in a variety of different types and are used in a variety of applications. They can be used in hydraulics, pneumatics, and many other industries.
Types
Coupling is a term used to describe a relationship between different modules. When a module depends on another, it can have different types of coupling. Common coupling occurs when modules share certain overall constraints. When this type of coupling occurs, any changes to the common constraint will also affect the other modules. Common coupling has its advantages and disadvantages. It is difficult to maintain and provides less control over the modules than other types of coupling.
There are many types of coupling, including meshing tooth couplings, pin and bush couplings, and spline couplings. It is important to choose the right coupling type for your specific application to get maximum uptime and long-term reliability. Listed below are the differences between these coupling types.
Rigid couplings have no flexibility, and require good alignment of the shafts and support bearings. They are often used in applications where high torque is required, such as in push-pull machines. These couplings are also useful in applications where the shafts are firmly attached to one another.
Another type of coupling is the split muff coupling. This type is made of cast iron and has two threaded holes. The coupling halves are attached with bolts or studs.
Applications
The coupling function is an incredibly versatile mathematical tool that can be used in many different scientific domains. These applications range from physics and mathematics to biology, chemistry, cardio-respiratory physiology, climate science, and electrical engineering. The coupling function can also help to predict the transition from one state to another, as well as describing the functional contributions of subsystems in the system. In some cases, it can even be used to reveal the mechanisms that underlie the functionality of interactions.
The coupling selection process begins with considering the intended use of the coupling. The application parameters must be determined, as well as the operating conditions. For example, if the coupling is required to be used for power transmission, the design engineer should consider how easily the coupling can be installed and serviced. This step is vital because improper installation can result in a more severe misalignment than is specified. Additionally, the coupling must be inspected regularly to ensure that the design parameters remain consistent and that no detrimental factors develop.
Choosing the right coupling for your application is an important process, but it need not be difficult. To find the right coupling, you must consider the type of machine and environment, as well as the torque, rpm, and inertia of the system. By answering these questions, you will be able to select the best coupling for your specific application.
Problems
A coupling is a device that connects two rotating shafts to transfer torque and rotary motion. To achieve optimal performance, a coupling must be designed for the application requirements it serves. These requirements include service, environmental, and use parameters. Otherwise, it can prematurely fail, causing inconvenience and financial loss.
In order to prevent premature failure, couplings should be properly installed and maintained. A good practice is to refer to the specifications provided by the manufacturer. Moreover, it is important to perform periodic tests to evaluate the effectiveness of the coupling. The testing of couplings should be performed by qualified personnel.
editor by CX 2023-05-18
China Professional 2 Inch Stainless Steel Hydraulic Fittings Galvanized Adaptor Quick Couplings coupling alignment
Product Description
2 inch stainless steel hydraulic fittings for hydraulic hoses
Product Description:
1. Ferrule
Ferrule for SAE100R1AT/EN 853 1SN HOSE
Ferrule for SAE100R1A EN 853 1ST HOSE
Ferrule for SAE100R2AT/DIN20571 2SN HOSE
Ferrule for SAE100R2A/EN853 2SN HOSE
FERRULE for SAE100R1AT-R2AT,EN853 1SN-2SN and EN 857 2SC
FERRULE for 4SP, 4SH/10-16, R12/06-16 HOSE
FERRULE for 4SH, R12/32 HOSE
2. Hose Fittings
1) Material: Carbon steel, Stainless steel
2) Finish: yellow Zinc plated, White Zinc Plated
3) Standards: SAE, JIC, BSP, NPT, DIN, etc
We are manufacturing and marketing all kinds of hydraulic fittings, we can also produce according to customers’ drawings or samples.
| 1)METRIC FITTINGS | 2)BRITISH FITTINGS | 3)AMERICAN FITTINGS |
| Metric Flat Seal Fittings | BSP O-RING Seal Fittings | SAE O-RING Seal Fittings |
| Metric Multiseal Fittings | BSP Flat Seal Fittings | ORFS Flat Seal Fittings |
| Metric 60°Cone Seal Fittings | BSP Multiseal Fittings | NPSM 60°Cone Seal Fittings |
| Metric 74°Cone Seal Fittings | BSP 60°Cone Seal Fittings | JIC 74°Cone Seal Fittings |
| Metric 24°Cone O-RING Seal L..T. Fittings | BSPT Fittings | NPT Fittings |
| Metric Standpipe Straight Fittings | JIS BSP 60°Cone Seal Fittings | SAE Flange L.T. Fittings |
| JIS Metric 60°Cone Seal Fittings | SAE Flange H.T. Fittings |
Our Service: We can crimp hose assembly for our customers
Application:
Mainly used for construction equipment, hydraulic machinery, oil euipment and other hydraulic applications.
FAQ:
Conventional packaging: carton, can be customized according to customer needs;
Transportation: express, sea and air freight are support
Delivery Time:
1.If we have stock,we’ll send out to you in a week;
2. Generally, it will take about 20 days. The specific delivery date will be negotiated according to your order.
MOQ:100
(If the quantity you need is less than 100 pieces, please feel free to make an inquiry with us. If we have stock, you can also
order.)
Payment:LC/TT
our payment usual is T/T ,L/C ,if you need other payment , please inform us
| Certification: | ISO9001 |
|---|---|
| Pressure: | High Pressure |
| Work Temperature: | High Temperature |
| Thread Type: | Internal Thread |
| Installation: | Crimp Type |
| Material: | Carbon Steel/Stainless Steel/Brass |
| Customization: |
Available
| Customized Request |
|---|
Programming With Couplings
A coupling is a mechanical device that connects two shafts together and transmits power. Its purpose is to join rotating equipment and allows some degree of end-movement or misalignment. There are many different types of couplings. It’s important to choose the right one for your application.
Mechanical connection between two shafts
There are many ways to achieve mechanical connection between two shafts, including the use of a coupling. One common type is the beam coupling, which is also known as a helical coupling. It is used for transmission of torque between two shafts. This type of connection accommodates axial, parallel and angular misalignments.
The hubs and shafts of a worm gear are connected together by a coupling. This mechanical connection allows one shaft to turn another without causing a mechanical failure. This type of coupling is made from sliding or rubbing parts to transfer torque. However, the coupling is not designed to withstand jerks, so it isn’t suitable for high-speed applications.
The use of a coupling is common in machinery and equipment. It helps transmit power from one drive shaft to the other, while adding mechanical flexibility. It is also useful for reducing the impact and vibration caused by misalignment. It also protects the drive shaft components from wear and tear.
A double-hook coupling can be used to provide a uniform angular velocity at the driven shaft. Another example is a double-jointed coupling. A double-jointed coupling can be used to connect shafts that are not directly intersecting. The double-jointed yoke can be used for the same purpose.
A shaft coupling is a device that maintains a strong mechanical connection between two shafts. It transfers motion from one shaft to another, at all loads and misalignments. Unlike a conventional linkage, a shaft coupling isn’t designed to allow relative motion between the two shafts. Couplings often serve several purposes in a machine, but their primary use is torque and power transmission.
Functions that control the flow of another function
One of the simplest programming constructs is a function that controls the flow of another function. A function can take an argument and return a different value, but it must be ready to return before it can pass that value to another function. To do this, you can use the goto statement and the if statement. Another way to control flow is to use a conditional statement.
Criteria for selecting a coupling
There are several important factors to consider when choosing the right coupling. One of the most important factors is coupling stiffness, which depends on the material used and the shape. The stiffness of a coupling determines its ability to resist elastic deformation. A stiff coupling is desirable for certain types of applications, but it’s undesirable for others. Stiffness can reduce the performance of a system if there’s too much inertia. To avoid this, ensure that the coupling you choose is within the recommended limits.
The size of a coupling is also important. Different coupling types can accommodate different shaft sizes and shapes. Some couplings have special features, such as braking and shear pin protection. When choosing a coupling, you should also consider the type of driven equipment. If you need to connect a high-torque motor, for example, you’ll want to choose a gear coupling. Likewise, a high-speed machine may require a disc coupling.
Another factor to consider when selecting a coupling is the torque rating. Despite its importance, it’s often underestimated. The torque rating is defined as the torque of the coupling divided by its OD. In some cases, torque may fluctuate during a cycle, requiring a coupling with a higher torque rating.
Torsionally flexible couplings are also important to consider. Their design should be able to withstand the torque required during operation, as well as the required speed. The coupling should also have a high degree of torsional stiffness, as well as damping. Furthermore, a damping coupling can reduce the energy wasted through vibration.
The sizing of a coupling is also determined by the torque. Many engineers use torque to select the correct coupling size, but they also take into consideration torsional flexibility and torsional stiffness. For example, a shaft may be able to handle large torque without damaging the coupling, while a disk may be unable to handle large amounts of torque.
Besides torque, another important consideration in coupling selection is the cost. While a coupling may be cheaper, it may be less reliable or easier to maintain. Couplings that are difficult to service may not last as long. They may also require frequent maintenance. If that’s the case, consider purchasing a coupling with a low service factor.
There are many different types of couplings. Some require additional lubrication throughout their lifetime, while others are 100% lubrication-free. An example of a 100% lubrication-free coupling is the RBI flexible coupling from CZPT. This type of coupling can significantly reduce your total cost of ownership.
In addition to the above-mentioned benefits, elastomeric couplings are low-cost and need little maintenance. While they are often cheaper than metallic couplings, they also have excellent shock absorption and vibration dampening properties. However, they are susceptible to high temperatures. Also, they are difficult to balance as an assembly, and have limited overload torque capacity.
editor by CX 2023-04-21
China Factory Hydraulic Fitting Metric/Bsp/NPT Hydraulic Hose Crimping Fittings and Couplings capacitive coupling
Product Description
Some words and phrases to say about our manufacturing unit and me:
Hello,I am Alice,I perform in this field for practically 10 many years,when consumers inquire the particulars from me,I will always pay out attention and reply them as before long as attainable,for orders,I will in depth create customers’ need on the production plan,and consider myself as buyers,I go through all the production approach,so that I can get a comprehensive comprehension for orders.
Buyers is our friend,we want to talk with you coronary heart to heart.
Our factory alsways manage the top quality from raw meterial→forging→finish machining→assembling→water test→packing to maintain the guarantee to our clients,we are strict with it,so that our products draw in buyers from property and overseas.
| HangZhou XUNQI VALVE Producing Co.,Ltd |
HangZhou Xunqi Valve Producing Co.,ltd was established in 2008,located in HangZhou,ZHangZhoug,known as the “City of Chinese Valve” .It engages in the layout and improvement,manufaturing and service of copper valves,copper pipe fittings and other copper goods.For a prolonged time,the company has been constantly upholding the management guiding ideology of ” merchandise quality as the centre”,and the services idea of “integrity initial,consumer very first”,and is delicated to bettering prodcut good quality.At existing,customers are all more than China,North The us,Europe,Africa and the Center east and other Regions.The firm has yearly creation quantity of in excess of 80,000,000 RMB.
Look about,the firm will keep on to keep promises”spend respect to deal and be credible”,sincerely offer you provider for all cilents.
Technological Standard:
| Body | Normally fifty seven-3,CW617N,or other meterials as your ask for |
| Norminal Diameter | A lot of |
| Working Stress | 1.6Mpa |
| Working Medium | Water |
| Doing work Temperature | -20°C≤T≤120°C |
| Thread | BSP, BSPT, NPT |
Factory Exhibition
Our showroom
Other Merchandise
| FAQ |
| one.CAN I HAVE A SAMPLE Order FOR VALVE ? |
| Yes! Of course.Pls speak to us for much more specifics.Some samples will be equipped be free of charge but you require spend the freight. |
| 2.What is YOUR PAYMENT Terms? |
| Typically thirty% T/T in advance,70% towards the duplicate of B/L,also we welcome huge orders with L/C or other payment following we chat about it . |
| 3.DO YOU HAVE MOQ FOR ORDERS? |
| One piece for sample checking is offered,but manufacturing requirements over 2000 pcs,minimal MOQ is obtainable for shares. |
| 4.CAN YOU Provide OEM Items ? |
| Of course,of course.We usually offer you OEM for our previous and new buyers. |
| 5.What is actually THE Package deal AND HOW TO SHIP THE Goods ? |
| Typically we use wood pallet or as your ask for.The merchandise are shipped by sea or other shipment as your request. |
| Transport Package: | Carton or Pallet |
|---|---|
| Specification: | 1/2", 3/4", 1" |
| Trademark: | OEM brand |
| Origin: | Taizhou, China |
###
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
|---|
###
| YUHUAN XUNQI VALVE MANUFACTURING Co.,Ltd |
###
| Body | Normally 57-3,CW617N,or other meterials as your request |
| Norminal Diameter | Many |
| Working Pressure | 1.6Mpa |
| Working Medium | Water |
| Working Temperature | -20°C≤T≤120°C |
| Thread | BSP, BSPT, NPT |
###
 |
|
###
| FAQ |
| 1.CAN I HAVE A SAMPLE ORDER FOR VALVE ? |
| Yes! Of course.Pls contact us for more details.Some samples will be supplied be free but you need pay the freight. |
| 2.WHAT’S YOUR PAYMENT TERMS? |
| Normally 30% T/T in advance,70% against the copy of B/L,also we welcome big orders with L/C or other payment after we talk about it . |
| 3.DO YOU HAVE MOQ FOR ORDERS? |
| One piece for sample checking is available,but production needs over 2000 pcs,low MOQ is available for stocks. |
| 4.CAN YOU OFFER OEM PRODUCTS ? |
| Yes,of course.We always offer OEM for our old and new customers. |
| 5.WHAT’S THE PACKAGE AND HOW TO SHIP THE GOODS ? |
| Usually we use wood pallet or as your request.The goods are shipped by sea or other shipment as your request. |
| Transport Package: | Carton or Pallet |
|---|---|
| Specification: | 1/2", 3/4", 1" |
| Trademark: | OEM brand |
| Origin: | Taizhou, China |
###
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
|---|
###
| YUHUAN XUNQI VALVE MANUFACTURING Co.,Ltd |
###
| Body | Normally 57-3,CW617N,or other meterials as your request |
| Norminal Diameter | Many |
| Working Pressure | 1.6Mpa |
| Working Medium | Water |
| Working Temperature | -20°C≤T≤120°C |
| Thread | BSP, BSPT, NPT |
###
|
|
###
| FAQ |
| 1.CAN I HAVE A SAMPLE ORDER FOR VALVE ? |
| Yes! Of course.Pls contact us for more details.Some samples will be supplied be free but you need pay the freight. |
| 2.WHAT’S YOUR PAYMENT TERMS? |
| Normally 30% T/T in advance,70% against the copy of B/L,also we welcome big orders with L/C or other payment after we talk about it . |
| 3.DO YOU HAVE MOQ FOR ORDERS? |
| One piece for sample checking is available,but production needs over 2000 pcs,low MOQ is available for stocks. |
| 4.CAN YOU OFFER OEM PRODUCTS ? |
| Yes,of course.We always offer OEM for our old and new customers. |
| 5.WHAT’S THE PACKAGE AND HOW TO SHIP THE GOODS ? |
| Usually we use wood pallet or as your request.The goods are shipped by sea or other shipment as your request. |
Types of Couplings
A coupling is a device used to join two shafts together and transmit power. Its purpose is to join rotating equipment while permitting a degree of end movement and misalignment. There are many types of couplings, and it is important to choose the right one for your application. Here are a few examples of couplings.
Mechanical
The mechanical coupling is an important component in power transmission systems. These couplings come in various forms and can be used in different types of applications. They can be flexible or rigid and operate in compression or shear. In some cases, they are permanently attached to the shaft, while in other cases, they are removable for service.
The simplest type of mechanical coupling is the sleeve coupling. It consists of a cylindrical sleeve with an internal diameter equal to the diameter of the shafts. The sleeve is connected to the shafts by a key that restricts their relative motion and prevents slippage. A few sleeve couplings also have threaded holes to prevent axial movement. This type of coupling is typically used for medium to light-duty torque.
Another type of mechanical coupling is a jaw coupling. It is used in motion control and general low-power transmission applications. This type of coupling does not require lubrication and is capable of accommodating angular misalignment. Unlike other types of couplings, the jaw coupling uses two hubs with intermeshing jaws. The jaw coupling’s spider is typically made of copper alloys. In addition, it is suitable for shock and vibration loads.
Mechanical couplings can be made from a variety of materials. One popular choice is rubber. The material can be natural or chloroprene. These materials are flexible and can tolerate slight misalignment.
Electrical
Electrical coupling is the process in which a single electrical signal is transferred from a nerve cell to another. It occurs when electrical signals from two nerve cells interact with each other in a way similar to haptic transmission. This type of coupling can occur on its own or in combination with electrotonic coupling in gap junctions.
Electrical coupling is often associated with oscillatory behavior of neurons. The mechanism of electrical coupling is complex and is studied mathematically to understand its effect on oscillatory neuron networks. For example, electrical coupling can increase or decrease the frequency of an oscillator, depending on the state of the neuron coupled to it.
The site of coupling is usually the junction of opposing cell membranes. The cellular resistance and the coupling resistance are measured in voltage-clamp experiments. This type of coupling has a specific resistance of 100 O-cm. As a result, the coupling resistance varies with the frequency.
The authors of this study noted that electrotonic coupling depends on the ratio between the resistance of the nonjunctional membranes and the junctional membranes. The voltage attenuation technique helps reveal the differences in resistance and shunting through the intercellular medium. However, it is unclear whether electrotonic coupling is electrostatically mediated.
Electrical coupling has also been suggested to play a role in the intercellular transfer of information. There are many examples that support this theory. A message can be a distinct qualitative or quantitative signal, which results in a gradient in the cells. Although gap junctions are absent at many embryonic interaction sites, increasing evidence suggests a role in information transfer.
Flexible
When it comes to choosing the right Flexible Coupling, there are several factors that you should take into account. Among these factors is the backlash that can be caused by the movement of the coupling. The reason for this problem is the fact that couplings that do not have anti-fungal properties can be easily infected by mold. The best way to avoid this is to pay attention to the moisture content of the area where you are installing the coupling. By following these guidelines, you can ensure the best possible installation.
To ensure that you are getting the most out of your flexible couplings, you must consider their characteristics and how easy they are to install, assemble, and maintain. You should also look for elements that are field-replaceable. Another important factor is the coupling’s torsional rigidity. It should also be able to handle reactionary loads caused by misalignment.
Flexible couplings come in many different types. There are diaphragm and spiral couplings. These couplings allow for axial motion, angular misalignment, and parallel offset. They have one-piece construction and are made from stainless steel or aluminum. These couplings also offer high torsional stiffness, which is beneficial for applications requiring high torques.
Flexible couplings have several advantages over their rigid counterparts. They are designed to handle misalignments of up to seven degrees and 0.025 inches. These characteristics are important in motion control applications. Flexible couplings are also inexpensive, and they do not require maintenance.
Beam
A beam coupling is a type of mechanical coupling, usually one solid piece, that connects two mechanical parts. Its performance is largely determined by the material used. Typical materials include stainless steel, aluminum, Delrin, and titanium. The beam coupling is rated for different speeds and torques. The coupling should be selected according to the application. In addition to the material, the application should also consider the speed and torque of the system.
There are two main types of beam couplings. The first is the helical beam coupling, which has a continuous multi spiral cut. This type of coupling offers a high degree of flexibility and compensates for a high degree of misalignment. The second type of beam coupling is the helical shaft coupling, which has a low torsional stiffness, which makes it ideal for small torque applications.
Another type of beam coupling is the multiple beam design, which combines two beams. It allows for more tolerance in manufacturing and installation and protects expensive components from excessive bearing loads. It also helps keep beams shorter than a single beam coupling. This type of coupling also enables a higher torque capacity and torsional stiffness.
Beam couplings can be manufactured with different materials, including stainless steel and aluminum. The “A” series is available in aluminum and stainless steel and is ideal for general-purpose and light-duty applications. It is also economical and durable. This type of coupling can also be used with low torque pumps or encoder/resolver systems.
Pin & bush
The Pin & bush coupling is a versatile, general-purpose coupling with high tensile bolts and rubber bushes. It can tolerate a wide range of operating temperatures and is suitable for use in oil and water-resistance applications. Its unique design enables it to be used in either direction. In addition, it requires no lubrication.
The pin bush coupling is a fail-safe coupling with a long service life and is used for high-torque applications. It provides torsional flexibility and dampens shocks, making it a flexible coupling that protects equipment and reduces maintenance costs. Its hubs are forged from graded cast iron for strength and durability. Besides, the coupling’s elastomer elements reduce vibration and impact loads. It also accommodates a misalignment of up to 0.5 degrees.
Pin & bush couplings are a popular choice for a variety of different applications. This coupling features a protective flange design that protects the coupling flange from wear and tear. The coupling nut is secured to one flange, while a rubber or leather bush sits between the other flange. Its unique design makes it ideal for use in applications where misalignment is a small factor. The rubber bushing also helps absorb vibration and shock.
Mesh tooth
Mesh tooth couplings are used to transfer torque between two shafts and reduce backlash. However, mesh tooth couplings have some limitations. One disadvantage is the break-away friction factor in the axial direction. This problem is caused by the high contact force between the tooth and gear mesh. This can cause unpredictable forces on the shafts.
In this paper, we present a FEM model for mesh tooth coupling. We first validate the mesh density. To do so, we compute the bolt stress as a uniaxial tensile during the tightening process. We used different mesh sizes and mesh density to validate our results.
The mesh stiffness of gear pairs is influenced by lead crown relief and misalignment. For example, if one tooth is positioned too far in the axis, the mesh stiffness will be decreased. A misaligned gear pair will lose torque capacity. A mesh tooth coupling can be lubricated with oil.
An ideal mesh tooth coupling has no gaps between the teeth, which reduces the risk of uneven wear. The coupling’s quality exposed fasteners include SAE Grade 5 bolts. It also offers corrosion resistance. The couplings are compatible with industrial environments. They also eliminate the need for selective assembly in sleeve couplings.
editor by CX 2023-03-27
China 3/4 Inch ISO 7241-1 Hydraulic Carbon Steel Quick Connect Fittings and Couplings coupling connector
Product Description
| Material | Carbon Metal or Stainless Steel |
| Color | Customer’s Ask for |
| Dimension | 1/4″-2″ |
| Emblem | Customized emblem or Using our ‘Q’ |
| Area of orgin | ZheJiang ,China (Mainland) |
| OEM Recognized | Sure |
| Thread | NPT G BSP |
| Variety | Hydraulic hose swift coupling |
| Technology | CNC Machining |
| Material | Brass |
| Software | Physical development,hydraulic set up,car components,sleeves |
| Packing | plastic luggage inside of ,and outdoors with cartons |
| Payment conditions | T/T |
| Shipping and delivery conditions | FOB(ZheJiang ) |
| Marketing | all more than the world ,largely in Europe and The us |
| Shipping time | With 20days right after buy confirmed,is dependent on your quantity |
Product Image:
PACKING AND SHIPPMENT:
WORKSHOP:
Associated Product:
Ferrule, Hydraulic fittings, Hydraulic hose fittings, Hydraulic adapter, Hydrualic connections, hydraulic 3-piece fit, union tee, union cross, and many others
one:Ferrule, matched with several types of pipes these kinds of as SAE, DIN, EN, GB and many others
two:Metric Fitting
Flat Seal Fitting, Xihu (West Lake) Dis.t-seal fitting, spherical seal fitting, 60° Cone seal fitting, 74° cone seal fitting, 24°cone O-ring L.T. Fitting, 24°cone O-ring H.T. Fitting, JIS 60° Cone Seal Fitting, Standpipe Fitting, Japan Metric Fitting and so forth
3: British Pipe Adapter
JIS BSP 60° Cone seal Adapter, BSPT Adapter, BSP multiseal adapter, BSP flat Seal Adapter, BSP O-ring Seal Adapter
4: Americal Pipe Adaptor
SAE Code 62 Flange, SAE Code sixty one Flange, NPT Adpator, JIC 74°Cone Seal Adaptor, NPSM 60°Cone Seal Adaptor, ORFS Flat Seal Adaptor, SAE O-ring Seal Adaptor
5: Banjo Adaptor
MetricBanjo Adaptor, BSP Banjo Adaptor
six: Staplelok Adaptor
7: Double Finished Adaptor
8: Metric Transition Adaptor
nine: British Transition Adaptor
10:American Changeover Adaptor
FAQ:
Q: How can you guarantee your solution good quality?
A: We will arrange sample affirmation before generation. For the duration of the generation, we have professional QC staffs management the high quality and manufacture in accordance to the verified sample.
Q: Do you supply hydraulic rapid coupling fitting OEM services and can you create as our drawings?
A: Yes. We offer rapid coupling OEM provider and your created drawings.
Q: Do you provide samples ? is it free of charge or extra ?
A: Indeed, we could provide the sample for free demand but do not pay out the cost of freight.
Q: What is your phrases of payment ?
A: Payment=1000USD, 30% T/T in advance ,balance prior to shippment.
Q: What’s your shipping and delivery time?
A: Generally, we will prepare shipment with twenty days right after acquiring the deposit. If urgent, we can also satisfy your necessity.
| Certification: | ISO9001 |
|---|---|
| Pressure: | High Pressure |
| Work Temperature: | High Temperature |
| Thread Type: | External Thread |
| Installation: | Flared Type |
| Material: | Brass |
###
| Samples: |
US$ 0.01/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Material | Carbon Steel or Stainless Steel |
| Color | Customer’s Request |
| Size | 1/4"-2" |
| Logo | Customized logo or USing our ‘Q’ |
| Place of orgin | Hebei ,China (Mainland) |
| OEM Accepted | Yes |
| Thread | NPT G BSP |
| Type | Hydraulic hose quick coupling |
| Technology | CNC Machining |
| Material | Brass |
| Application | Physical construction,hydraulic installation,auto parts,sleeves |
| Packing | plastic bags inside ,and outside with cartons |
| Payment terms | T/T |
| Delivery terms | FOB(tianjin) |
| Marketing | all over the world ,mainly in Europe and America |
| Delivery time | With 20days after order confirmed,depends on your quantity |
| Certification: | ISO9001 |
|---|---|
| Pressure: | High Pressure |
| Work Temperature: | High Temperature |
| Thread Type: | External Thread |
| Installation: | Flared Type |
| Material: | Brass |
###
| Samples: |
US$ 0.01/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Material | Carbon Steel or Stainless Steel |
| Color | Customer’s Request |
| Size | 1/4"-2" |
| Logo | Customized logo or USing our ‘Q’ |
| Place of orgin | Hebei ,China (Mainland) |
| OEM Accepted | Yes |
| Thread | NPT G BSP |
| Type | Hydraulic hose quick coupling |
| Technology | CNC Machining |
| Material | Brass |
| Application | Physical construction,hydraulic installation,auto parts,sleeves |
| Packing | plastic bags inside ,and outside with cartons |
| Payment terms | T/T |
| Delivery terms | FOB(tianjin) |
| Marketing | all over the world ,mainly in Europe and America |
| Delivery time | With 20days after order confirmed,depends on your quantity |
Types of Coupling
A coupling is a device used to join two shafts together and transmit power. Its primary function is to join rotating equipment and allows for some end movement and misalignment. This article discusses different types of coupling, including Magnetic coupling and Shaft coupling. This article also includes information on Overload safety mechanical coupling.
Flexible beam coupling
Flexible beam couplings are universal joints that can deal with shafts that are offset or at an angle. They consist of a tube with couplings at both ends and a thin, flexible helix in the middle. This makes them suitable for use in a variety of applications, from motion control in robotics to attaching encoders to shafts.
These couplings are made of one-piece materials and are often made of stainless steel or aluminium alloy. However, they can also be made of acetal or titanium. While titanium and acetal are less common materials, they are still suitable for high-torque applications. For more information about beam couplings, contact CZPT Components.
Flexible beam couplings come in a variety of types and sizes. W series couplings are good for general purpose applications and are relatively economical. Stainless steel versions have increased torque capacity and torsional stiffness. Flexible beam couplings made of aluminum are ideal for servo and reverse motion. They are also available with metric dimensions.
Flexible beam couplings are made of aluminum alloy or stainless steel. Their patented slot pattern provides low bearing load and high torsional rigidity. They have a long operational life. They also require zero maintenance and can handle angular offset. Their advantages outweigh the disadvantages of traditional beam couplings.
Magnetic coupling
Magnetic coupling transfers torque from one shaft to another using a magnetic field. These couplings can be used on various types of machinery. These types of transmissions are very useful in many situations, especially when you need to move large amounts of weight. The magnetic field is also very effective at reducing friction between the two shafts, which can be extremely helpful if you’re moving heavy items or machinery.
Different magnetic couplings can transmit forces either linearly or rotated. Different magnetic couplings have different topologies and can be made to transmit force in various geometric configurations. Some of these types of couplings are based on different types of materials. For example, a ceramic magnetic material can be used for applications requiring high temperature resistance.
Hybrid couplings are also available. They have a hybrid design, which allows them to operate in either an asynchronous or synchronous mode. Hysterloy is an alloy that is easily magnetized and is used in synchronous couplings. A synchronous magnetic coupling produces a coupled magnetic circuit.
Magnetic coupling is a key factor in many physical processes. In a crystal, molecules exhibit different magnetic properties, depending on their atomic configuration. Consequently, different configurations produce different amounts of magnetic coupling. The type of magnetic coupling a molecule exhibits depends on the exchange parameter Kij. This exchange parameter is calculated by using quantum chemical methods.
Magnetic couplings are most commonly used in fluid transfer pump applications, where the drive shaft is hermetically separated from the fluid. Magnetic couplings also help prevent the transmission of vibration and axial or radial loads through the drive shaft. Moreover, they don’t require external power sources, since they use permanent magnets.
Shaft coupling
A shaft coupling is a mechanical device that connects two shafts. The coupling is designed to transmit full power from one shaft to the other, while keeping the shafts in perfect alignment. It should also reduce transmission of shock loads. Ideally, the coupling should be easy to connect and maintain alignment. It should also be free of projecting parts.
The shaft couplings that are used in machines are typically made of two types: universal coupling and CZPT coupling. CZPT couplings are designed to correct for lateral misalignment and are composed of two flanges with tongues and slots. They are usually fitted with pins. The T1 tongue is fitted into flange A, while the T2 tongue fits into flange B.
Another type of shaft coupling is known as a “sliced” coupling. This type of coupling compensates for inevitable shaft misalignments and provides high torque. Machined slits in the coupling’s outer shell help it achieve high torsional stiffness and excellent flexibility. The design allows for varying engagement angles, making it ideal for many different applications.
A shaft coupling is an important component of any machine. Proper alignment of the two shafts is vital to avoid machine breakdowns. If the shafts are misaligned, extra force can be placed on other parts of the machine, causing vibration, noise, and damage to the components. A good coupling should be easy to connect and should ensure precise alignment of the shaft. Ideally, it should also have no projecting parts.
Shaft couplings are designed to tolerate a certain amount of backlash, but it must be within a system’s threshold. Any angular movement of the shaft beyond this angle is considered excessive backlash. Excessive backlash results in excessive wear, stress, and breakage, and may also cause inaccurate alignment readings. It is therefore imperative to reduce backlash before the shaft alignment process.
Overload safety mechanical coupling
Overload safety mechanical couplings are devices that automatically disengage when the torque applied to them exceeds a specified limit. They are an efficient way to protect machinery and reduce the downtime associated with repairing damaged machinery. The advantage of overload couplings is their fast reaction time and ease of installation.
Overload safety mechanical couplings can be used in a wide range of applications. Their automatic coupling mechanisms can be used on any face or edge. In addition, they can be genderless, incorporating both male and female coupling features into a single mechanism. This means that they are both safe and gender-neutral.
Overload safety couplings protect rotating power transmission components from overloads. Overload protection devices are installed on electric motors to cut off power if the current exceeds a certain limit. Likewise, fluid couplings in conveyors are equipped with melting plug elements that allow the fluid to escape when the system becomes too hot. Mechanical force transmission devices, such as shear bolts, are designed with overload protection in mind.
A common design of an overload safety mechanical coupling consists of two or more arms and hubs separated by a plastic spider. Each coupling body has a set torque threshold. Exceeding this threshold may damage the spider or damage the jaws. In addition, the spider tends to dampen vibration and absorb axial extension. This coupling style is nearly backlash free, electrically isolating, and can tolerate very little parallel misalignment.
A mechanical coupling may also be a universal joint or jaw-clutch coupling. Its basic function is to connect the driver and driven shafts, and limits torque transfer. These devices are typically used in heavy-duty industries, such as steel plants and rolling mills. They also work well with industrial conveyor systems.
CZPT Pulley
The CZPT Pulley coupling family offers a comprehensive range of couplings for motors of all types. Not only does this range include standard motor couplings, but also servo couplings, which require ultra-precise control. CZPT Pulley couplings are also suitable for engine applications where high shocks and vibrations are encountered.
CZPT Pulley couplings have a “sliced” body structure, which allows for excellent torsional stiffness and strength. They are corrosion-resistant and can withstand high rotational speeds. The couplings’ design also ensures accurate shaft rotation while limiting shaft misalignment.
CZPT Pulley has introduced the CPU Pin Type couplings, which are effective at damping vibration and maintain zero backlash. They are also made from aluminum and are capable of absorbing heat. They come with recessed tightening screws. They can handle speeds up to 4,000 RPM, and are RoHS-compliant.
editor by czh 2022-12-22