NM50 Fleksibel kjevekobling
NM50 NM fleksibel kobling med 7–19 mm boringsområde, 12 500 o/min referansemakshastighet og 1,3 kgf·m referansenormalt dreiemoment.
Vis detaljer →Primary NM Coupling
NM82 Flexible Jaw Coupling
NM82 NM fleksibel kobling med 10–32 mm boringsområde, 8000 o/min referansemakshastighet og 5,0 kgf·m referansenormalt dreiemoment.
Bore range10-32 mm
Reference max speed8000 rpm
Reference normal torque5.0 kgfu00b7m
NM82 is an NM flexible coupling size for industrial shaft connections. Its size data gives a first check for bore capacity, operating speed and torque. The finished hubs are machined to the actual shafts, so the driver and driven bores may be different.
NM82 technical specifications
| Parameter | Value | Buyer note |
|---|---|---|
| Bore range | 10-32 mm | Confirm both finished bores independently. |
| Reference max speed | 8000 rpm | Compare with the actual operating speed. |
| Reference normal torque | 5.0 kgf·m | Use with the real machine duty, not as the only selection input. |
Specify both shaft interfaces
The coupling size does not define the finished bore. State the diameter, keyway and fit for Shaft 1 and Shaft 2 separately. If axial space is restricted, include the available hub envelope or an assembly drawing.
Operating information for selection
| Punkt | Hva som skal bekreftes |
|---|---|
| Driver | Motor, engine or other driver; include power and operating speed. |
| Driven equipment | Pump, compressor, gearbox, fan, mixer, conveyor or other machine. |
| Duty pattern | Continuous/cyclic service, starts, reversals and shock loading where present. |
| Environment | Unusual heat, contamination, oil/chemical exposure or outdoor conditions. |
| Replacement work | Existing marking, photos and measurable hub dimensions. |
Typical applications
NM couplings are commonly used on pumps, compressors, motor-to-gearbox drives, fans, blowers, mixers, conveyors and general industrial machinery. Application suitability depends on the complete duty and shaft interfaces.
Request a NM82 Quote
Send both shaft dimensions, operating speed, driven equipment and quantity. Include the existing coupling marking or drawing for replacement work.
More NM coupling sizes
NM67 Fleksibel kjevekobling
NM67 NM fleksibel kobling med 8–28 mm boringsområde, 10 000 o/min referansemakshastighet og 2,2 kgf·m referansenormalt dreiemoment.
Vis detaljer →
NM97 Flexible Jaw Coupling
NM97 NM flexible coupling with 10-42 mm bore range, 7000 rpm reference maximum speed and 10.5 kgf·m reference normal torque.
Vis detaljer →
