제품 설명
Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling
제품 설명
Main products
Coupling refers to a device that connects 2 shafts or shafts and rotating parts, rotates together during the transmission of motion and power, and does not disengage under normal conditions. Sometimes it is also used as a safety device to prevent the connected parts from bearing excessive load, which plays the role of overload protection.
Couplings can be divided into rigid couplings and flexible couplings.
Rigid couplings do not have buffering property and the ability to compensate the relative displacement of 2 axes. It is required that the 2 axes be strictly aligned. However, such couplings are simple in structure, low in manufacturing cost, convenient in assembly and disassembly, and maintenance, which can ensure that the 2 axes are relatively neutral, have large transmission torque, and are widely used. Commonly used are flange coupling, sleeve coupling and jacket coupling.
Flexible coupling can also be divided into flexible coupling without elastic element and flexible coupling with elastic element. The former type only has the ability to compensate the relative displacement of 2 axes, but cannot cushion and reduce vibration. Common types include slider coupling, gear coupling, universal coupling and chain coupling; The latter type contains elastic elements. In addition to the ability to compensate the relative displacement of 2 axes, it also has the functions of buffering and vibration reduction. However, due to the strength of elastic elements, the transmitted torque is generally inferior to that of flexible couplings without elastic elements. Common types include elastic sleeve pin couplings, elastic pin couplings, quincunx couplings, tire type couplings, serpentine spring couplings, spring couplings, etc
Coupling performance
1) Mobility. The movability of the coupling refers to the ability to compensate the relative displacement of 2 rotating components. Factors such as manufacturing and installation errors between connected components, temperature changes during operation and deformation under load all put CZPT requirements for mobility. The movable performance compensates or alleviates the additional load between shafts, bearings, couplings and other components caused by the relative displacement between rotating components.
(2) Buffering. For the occasions where the load is often started or the working load changes, the coupling shall be equipped with elastic elements that play the role of cushioning and vibration reduction to protect the prime mover and the working machine from little or no damage.
(3) Safe, reliable, with sufficient strength and service life.
(4) Simple structure, easy to assemble, disassemble and maintain.
How to select the appropriate coupling type
The following items should be considered when selecting the coupling type.
1. The size and nature of the required transmission torque, the requirements for buffering and damping functions, and whether resonance may occur.
2. The relative displacement of the axes of the 2 shafts is caused by manufacturing and assembly errors, shaft load and thermal expansion deformation, and relative movement between components.
3. Permissible overall dimensions and installation methods, and necessary operating space for assembly, adjustment and maintenance. For large couplings, they should be able to be disassembled without axial movement of the shaft.
In addition, the working environment, service life, lubrication, sealing, economy and other conditions should also be considered, and a suitable coupling type should be selected by referring to the characteristics of various couplings.
If you cannot determine the type, you can contact our professional engineer
Related products
회사 소개
Our Equipments
Main production equipment:
Large lathe, surface grinder, milling machine, gear shaper, spline milling machine, horizontal broaching machine, gear hobbing machine, shaper, slotting machine, bench drilling machine, radial drilling machine, boring machine, band sawing machine, horizontal lathe, end milling machine, crankshaft grinder, CNC milling machine, casting equipment, etc.
Inspection equipment:
Dynamic balance tester, high-speed intelligent carbon and sulfur analyzer, Blochon optical hardness tester, Leeb hardness tester, magnetic yoke flaw detector, special detection, modular fixture (self-made), etc.
Machining equipments
Heat equipment
Our Factory
Application – Photos from our partner customers
Company Profile
Our leading products are mechanical transmission basic parts – couplings, mainly including universal couplings, drum gear couplings, elastic couplings and other 3 categories of more than 30 series of varieties. It is widely used in metallurgical steel rolling, wind power, hydropower, mining, engineering machinery, petrochemical, lifting, paper making, rubber, rail transit, shipbuilding and marine engineering and other industries.
Our factory takes the basic parts of national standards as the benchmark, has more than 40 years of coupling production experience, takes “scientific management, pioneering and innovation, ensuring quality and customer satisfaction” as the quality policy, and aims to continuously provide users with satisfactory products and services. The production is guided by reasonable process, and the ISO9001:2015 quality management system standard is strictly implemented. We adhere to the principle of continuous improvement and innovation of coupling products. In recent years, it has successfully developed 10 national patent products such as SWF cross shaft universal coupling, among which the double cross shaft universal joint has won the national invention patent, SWF cross shaft universal coupling has won the new product award of China’s general mechanical parts coupling industry and the ZHangZhoug Province new product science and technology project.
Our factory has strong technical force, excellent process equipment, complete professional production equipment, perfect detection means, excellent after-sales service, various products and complete specifications. At the same time, we can provide the design and manufacturing of special non-standard products according to the needs of users. Our products sell well at home and abroad, and are trusted by the majority of users. We sincerely welcome friends from all walks of life at home and abroad to visit and negotiate for common development.p
| 표준 또는 비표준: | 기준 |
|---|---|
| 샤프트 구멍: | 19-32 |
| 토크: | >80N.M |
| 내경: | 19mm |
| 속도: | 4000r/m |
| 구조: | Flexible |
| 샘플: |
US$ 50/Piece
1개 (최소 주문 수량) | |
|---|
How does a flexible coupling handle angular, parallel, and axial misalignment?
A flexible coupling is designed to accommodate various types of misalignment between two rotating shafts: angular misalignment, parallel misalignment, and axial misalignment. The flexibility of the coupling allows it to maintain a connection between the shafts while compensating for these misalignment types. Here’s how a flexible coupling handles each type of misalignment:
- Angular Misalignment: Angular misalignment occurs when the axes of the two shafts are not collinear and form an angle with each other. Flexible couplings can handle angular misalignment by incorporating an element that can flex and bend. One common design is the “spider” or “jaw” element, which consists of elastomeric materials. As the shafts are misaligned, the elastomeric element can deform slightly, allowing the coupling to accommodate the angular offset between the shafts while still transmitting torque.
- Parallel Misalignment: Parallel misalignment, also known as offset misalignment, occurs when the axes of the two shafts are parallel but not perfectly aligned with each other. Flexible couplings can handle parallel misalignment through the same elastomeric element. The flexible nature of the element enables it to shift and adjust to the offset between the shafts, ensuring continuous power transmission while minimizing additional stresses on the machinery.
- Axial Misalignment: Axial misalignment, also called end-play misalignment, occurs when the two shafts move closer together or farther apart along their common axis. Flexible couplings can handle axial misalignment through specific designs that allow limited axial movement. For instance, some couplings use slotted holes or a floating member that permits axial displacement while maintaining the connection between the shafts.
By providing the capability to handle angular, parallel, and axial misalignment, flexible couplings offer several advantages for power transmission systems:
- They help to prevent premature wear and damage to the connected equipment, reducing maintenance and replacement costs.
- They minimize vibration and shock loads, enhancing the overall smoothness and reliability of the machinery.
- They reduce the risk of equipment failure due to misalignment-induced stresses, improving the system’s operational life.
- They allow for easier installation and alignment adjustments, saving time and effort during setup and maintenance.
Overall, flexible couplings play a crucial role in handling misalignment and ensuring efficient power transmission in various industrial applications.
플렉시블 커플링은 연결된 장비의 전반적인 신뢰성에 어떤 영향을 미칠까요?
유연한 커플링은 연결된 장비의 전반적인 신뢰성에 여러 가지 방식으로 상당한 영향을 미칩니다.
- 정렬 불량 보정: 플렉시블 커플링은 연결된 축 사이의 각도 및 평행 정렬 불량을 모두 수용할 수 있습니다. 정렬 불량을 허용함으로써 커플링은 베어링, 씰 및 기타 회전 부품에 가해지는 스트레스와 마모를 줄여줍니다. 이러한 특징은 해당 부품의 조기 고장을 방지하여 신뢰성을 향상시키고 장비 수명을 연장하는 데 기여합니다.
- 진동 감쇠: 플렉시블 커플링은 탄성체 또는 유연한 요소로 인해 고유한 진동 감쇠 특성을 지닙니다. 이러한 요소는 기계 작동 중에 발생하는 진동을 흡수하고 소산시킵니다. 진동 감쇠를 통해 커플링은 연결된 장비를 과도한 진동으로부터 보호하여 피로를 줄이고 기계적 고장을 방지합니다. 이러한 향상된 진동 제어는 시스템의 신뢰성을 높입니다.
- 충격 하중 흡수: 중장비나 고속 장비와 같이 갑작스러운 부하 변동이나 충격 하중이 발생하는 환경에서 플렉시블 커플링은 충격 흡수 장치 역할을 합니다. 충격 에너지를 흡수하고 분산시켜 갑작스러운 하중으로 인한 기계 손상을 방지합니다. 충격 하중 흡수 능력은 연결된 장비의 전반적인 신뢰성을 향상시키는 데 기여합니다.
- 마모 감소: 커플링의 유연성은 회전 장비에 가해지는 스트레스와 마모를 최소화합니다. 미세한 움직임과 정렬 불량을 허용하여 베어링 및 기타 중요 부품에 가해지는 마찰과 스트레스를 줄여줍니다. 이러한 마모 감소는 유지 보수 및 교체 빈도를 낮추어 장비의 전반적인 신뢰성을 향상시킵니다.
- 열팽창 보상: 기계의 온도 변화는 축의 열팽창 또는 수축을 유발할 수 있습니다. 플렉시블 커플링은 이러한 열적 영향을 보상하여 온도 변화에도 불구하고 기계의 정렬 상태를 정확하게 유지하도록 합니다. 이러한 보상은 걸림이나 정렬 불량을 방지하여 안정적인 성능을 보장합니다.
- 과부하 방지: 플렉시블 커플링은 연결된 장비를 과부하 및 비틀림 진동으로부터 보호하는 데 도움을 줍니다. 기계식 퓨즈 역할을 하여 과부하 발생 시 구동계를 차단함으로써 고가의 기계 장비 손상을 방지합니다. 이러한 안전 기능은 전반적인 신뢰성을 향상시키고 치명적인 고장 위험을 줄여줍니다.
- 손쉬운 유지보수 및 정렬: 플렉시블 커플링은 설치 및 정렬이 용이하도록 설계되었습니다. 이러한 특징 덕분에 유지보수 절차가 간소화되어 필요시 커플링을 쉽게 점검하고 교체할 수 있습니다. 커플링이 제대로 정렬되면 장비 성능과 수명이 향상되어 전반적인 신뢰성이 높아집니다.
플렉시블 커플링은 정렬 불량을 보정하고, 진동을 감쇠하며, 충격 하중을 흡수하고, 마모를 줄이는 등 다양한 보호 기능을 제공함으로써 연결된 장비의 신뢰성을 크게 향상시킵니다. 주요 부품의 수명을 연장하고, 가동 중지 시간을 최소화하며, 원활하고 효율적인 작동을 보장하므로 다양한 산업 분야에서 매우 중요한 부품입니다.
What are the advantages of using flexible couplings in mechanical systems?
Flexible couplings offer several advantages in mechanical systems, making them essential components in various applications. Here are the key advantages of using flexible couplings:
- 정렬 불량 보정: One of the primary advantages of flexible couplings is their ability to compensate for shaft misalignment. In mechanical systems, misalignment can occur due to various factors such as installation errors, thermal expansion, or shaft deflection. Flexible couplings can accommodate angular, parallel, and axial misalignment, ensuring smooth power transmission and reducing stress on the connected equipment and shafts.
- 진동 감쇠: Flexible couplings act as damping elements, absorbing and dissipating vibrations and shocks generated during operation. This feature helps to reduce noise, protect the equipment from excessive wear, and enhance overall system reliability and performance.
- Torsional Flexibility: Flexible couplings provide torsional flexibility, allowing them to handle slight angular and axial deflections. This capability protects the equipment from sudden torque fluctuations, shock loads, and torque spikes, ensuring smoother operation and preventing damage to the machinery.
- Overload Protection: In case of sudden overloads or torque spikes, flexible couplings can absorb and distribute the excess torque, protecting the connected equipment and drivetrain from damage. This overload protection feature prevents unexpected failures and reduces downtime in critical applications.
- Reduce Wear and Maintenance: By compensating for misalignment and damping vibrations, flexible couplings help reduce wear on the connected equipment, bearings, and seals. This results in extended component life and reduced maintenance requirements, leading to cost savings and improved system reliability.
- 열팽창 보상: In systems exposed to temperature variations, flexible couplings can compensate for thermal expansion and contraction, maintaining proper alignment and preventing binding or excessive stress on the equipment during temperature changes.
- Electric Isolation: Some types of flexible couplings, such as disc couplings, offer electrical isolation between shafts. This feature is beneficial in applications where galvanic corrosion or electrical interference between connected components needs to be minimized.
- Space and Weight Savings: Flexible couplings often have compact designs and low inertia, which is advantageous in applications with space constraints and where minimizing weight is crucial for performance and efficiency.
- Cost-Effectiveness: Flexible couplings are generally cost-effective solutions for power transmission and motion control, especially when compared to more complex and expensive coupling types. Their relatively simple design and ease of installation contribute to cost savings.
In summary, flexible couplings play a vital role in mechanical systems by providing misalignment compensation, vibration damping, overload protection, and torsional flexibility. These advantages lead to improved system performance, reduced wear and maintenance, and enhanced equipment reliability, making flexible couplings a preferred choice in various industrial, automotive, marine, and aerospace applications.
editor by CX 2023-08-30
