NM67 икемді жақ муфтасы
NM67 NM икемді муфтасы, 8-28 мм диаметрлі бұрау диапазоны, 10000 айн/мин максималды жылдамдығы және 2,2 кгс·м стандартты қалыпты бұрау моменті бар.
Мәліметтерді қарау →Primary NM Coupling
NM50 Flexible Jaw Coupling
7-19 мм диаметрлі бұрау диапазонымен, 12500 айн/мин максималды жылдамдығымен және 1,3 кгс·м стандартты қалыпты айналу моментімен NM50 NM икемді муфтасы.
Bore range7-19 mm
Reference max speed12500 rpm
Reference normal torque1.3 kgfu00b7m
NM50 is an NM flexible coupling size for industrial shaft connections. Its size data gives a first check for bore capacity, operating speed and torque. The finished hubs are machined to the actual shafts, so the driver and driven bores may be different.
NM50 technical specifications
| Parameter | Value | Buyer note |
|---|---|---|
| Bore range | 7-19 mm | Confirm both finished bores independently. |
| Reference max speed | 12500 rpm | Compare with the actual operating speed. |
| Reference normal torque | 1.3 kgf·m | Use with the real machine duty, not as the only selection input. |
Specify both shaft interfaces
The coupling size does not define the finished bore. State the diameter, keyway and fit for Shaft 1 and Shaft 2 separately. If axial space is restricted, include the available hub envelope or an assembly drawing.
Operating information for selection
| Тауар | Нені растау керек |
|---|---|
| Driver | Motor, engine or other driver; include power and operating speed. |
| Driven equipment | Pump, compressor, gearbox, fan, mixer, conveyor or other machine. |
| Duty pattern | Continuous/cyclic service, starts, reversals and shock loading where present. |
| Environment | Unusual heat, contamination, oil/chemical exposure or outdoor conditions. |
| Replacement work | Existing marking, photos and measurable hub dimensions. |
Typical applications
NM couplings are commonly used on pumps, compressors, motor-to-gearbox drives, fans, blowers, mixers, conveyors and general industrial machinery. Application suitability depends on the complete duty and shaft interfaces.
Request a NM50 Quote
Send both shaft dimensions, operating speed, driven equipment and quantity. Include the existing coupling marking or drawing for replacement work.
More NM coupling sizes
NM82 икемді жақ муфтасы
10-32 мм бұрау диапазонымен, 8000 айн/мин анықтамалық максималды жылдамдығымен және 5,0 кгс·м анықтамалық қалыпты бұрау моментімен NM82 NM икемді муфтасы.
Мәліметтерді қарау →
NM97 Flexible Jaw Coupling
NM97 NM flexible coupling with 10-42 mm bore range, 7000 rpm reference maximum speed and 10.5 kgf·m reference normal torque.
Мәліметтерді қарау →
