Ürün Açıklaması
Best Quality Rigid Coupling NM-97 NM-112 NM-128 Couplings
Shaft/Flexible/Rigid couplings
The chain coupling, composed of two-strand chains and 2 sprockets, features simple and compact structure, and high flexibility, power transmission capability and durability.
What’s more, the chain coupling allows simple connection/disconnection, and the use of the housing enhances safety and durability.
Type number: 3012, 4012, 4014, 4016, 5014, 5016, 5018,6018, 6571, 6571, 8018, 8571, 1571, 12571.
Başlıca Ürünler:
1. Timing Belt Pulley (Synchronous Pulley), Timing Bar, Clamping Plate;
2. Forging, Casting, Stampling Part;
3. V Belt Pulley and Taper Lock Bush; Sprocket, Idler and Plate Wheel;Spur Gear, Bevel Gear, Rack;
4. Shaft Locking Device: could be alternative for Ringfeder, Sati, Chiaravalli, Tollok, etc.;
5. Shaft Coupling: including Miniature couplings, Curved tooth coupling, Chain coupling, HRC coupling,
Normex coupling, Type coupling, GE Coupling, torque limiter, Universal Joint;
6. Shaft Collars: including Setscrew Type, Single Split and Double Splits;
7. Gear & Rack: Spur gear/rack, bevel gear, helical gear/rack.
8. Other customized Machining Parts according to drawings (OEM) Forging, Casting, Stamping Parts.
Packaging & Shipping:
All the products can be packed in cartons,or,you can choose the pallet packing.
MADE IN CHINA can be pressed on wooden cases.Land,air,sea transportation are available.UPS,DHL,TNT,
FedEx and EMS are all supported.
Company Introduction:
Factory View:
Exhibition:
SSS:
1. Minimum Sipariş Miktarı (MOQ)
A: Generally, 1 pc for standard parts; contact for nonstandard parts.
2. Delivery Time
A: In stock: within 5 working days. Out of stock: depends on your order quantity.
3. Nasıl Seçilir
A: part number or drawing, catalogue. If no, you can send us your sample, so we can make the drawing and sample accordingly.
4: What is the Warranty for your products?
A:Normally our warranty is 1 year.
Contacts:
| Standart mı, Standart Dışı mı? | Standard & Nonstandard |
|---|---|
| Delik Çapı: | Mevcut |
| Hız: | 4000 dev/dak |
| Yapı: | Flexible/Rigid/Shaft/Tyre/Chain Type etc. |
| Malzeme: | Steel/Cast Iron/Aluminum |
| Tip: | Rigid Coupling |
| Örnekler: |
US$ 0.1/Set
1 Set(Min.Order) | |
|---|
| Özelleştirme: |
Mevcut
| Özelleştirilmiş Talep |
|---|
Can flexible couplings be used in both horizontal and vertical shaft arrangements?
Yes, flexible couplings can be used in both horizontal and vertical shaft arrangements. The design of flexible couplings allows them to accommodate misalignment and compensate for angular, parallel, and axial displacements between the shafts, making them suitable for various shaft orientations.
Horizontal Shaft Arrangements:
In horizontal shaft arrangements, where the shafts are parallel to the ground or horizontal plane, flexible couplings are commonly used to connect two rotating shafts. These couplings help transmit torque from one shaft to another while accommodating any misalignment that may occur during operation. Horizontal shaft arrangements are common in applications such as pumps, compressors, conveyors, and industrial machinery.
Vertical Shaft Arrangements:
In vertical shaft arrangements, where the shafts are perpendicular to the ground or vertical plane, flexible couplings are also applicable. Vertical shafts often require couplings that can handle the additional weight and forces resulting from gravity. Flexible couplings designed for vertical applications can support the weight of the rotating equipment while allowing for some axial movement to accommodate thermal expansion or other displacements. Vertical shaft arrangements are commonly found in applications such as pumps, gearboxes, turbines, and some marine propulsion systems.
Considerations for Vertical Shaft Arrangements:
When using flexible couplings in vertical shaft arrangements, there are a few additional considerations to keep in mind:
- Thrust Load: Vertical shafts can generate thrust loads, especially in upward or downward direction. The flexible coupling should be selected based on its capacity to handle both radial and axial loads to accommodate these forces.
- Lubrication: Some vertical couplings may require additional lubrication to ensure smooth operation and reduce wear, particularly if they are exposed to high axial loads or extended vertical shafts.
- Support and Bearing: Proper support and bearing arrangements for the vertical shaft are essential to prevent excessive shaft deflection and ensure the flexible coupling functions correctly.
Overall, flexible couplings are versatile and adaptable to various shaft orientations, providing efficient power transmission and misalignment compensation. Whether in horizontal or vertical arrangements, using the appropriate flexible coupling design and considering the specific application requirements will help ensure reliable and efficient operation.
What role does a flexible coupling play in reducing downtime and maintenance costs?
A flexible coupling plays a significant role in reducing downtime and maintenance costs in industrial machinery and rotating equipment. Here are the key ways in which flexible couplings contribute to these benefits:
- Hizalama Hatası Telafisi: One of the primary functions of a flexible coupling is to accommodate misalignment between two connected shafts. Misalignment can occur due to various factors such as thermal expansion, foundation settling, or manufacturing tolerances. By allowing for misalignment, flexible couplings reduce the transmission of harmful forces and stresses to connected components, minimizing wear and preventing premature failures that could lead to costly downtime and repairs.
- Titreşim Sönümleme: Flexible couplings have inherent damping properties due to the elastomeric or flexible elements they incorporate. These elements absorb and dissipate vibration and shock loads that may arise from the operation of rotating machinery. By dampening vibrations, flexible couplings protect the connected equipment from excessive wear and fatigue, extending their service life and reducing the need for frequent maintenance or replacement.
- Şok Yükü Emilimi: In applications where sudden loads or shocks are common, such as in heavy machinery or high-speed equipment, flexible couplings act as shock absorbers. They can absorb and dissipate the impact energy, preventing damage to the machinery and minimizing downtime caused by unexpected failures or breakdowns.
- Easy Installation and Alignment: Flexible couplings are designed for ease of installation and alignment. Unlike rigid couplings that require precise shaft alignment, flexible couplings can tolerate some degree of misalignment during installation. This feature simplifies the setup process, reduces installation time, and lowers the risk of misalignment-related issues, ultimately minimizing downtime during initial installation or replacement of couplings.
- Reduced Maintenance Frequency: The ability of flexible couplings to handle misalignment and dampen vibrations results in reduced wear on bearings, seals, and other connected components. Consequently, the frequency of maintenance intervals can be extended, reducing the need for frequent inspections and component replacements. This directly translates to lower maintenance costs and less downtime for maintenance tasks.
- Equipment Protection: By reducing the transmission of shock loads and vibrations, flexible couplings act as protective barriers for connected equipment. They help prevent catastrophic failures and subsequent damage to expensive machinery, avoiding unplanned shutdowns and costly repairs.
Overall, flexible couplings are critical components that improve the reliability and longevity of rotating equipment. Their ability to handle misalignment, dampen vibrations, and protect against shock loads contributes to reduced downtime, lower maintenance costs, and increased productivity in industrial applications.
Esnek bağlantı elemanlarının üretiminde yaygın olarak hangi malzemeler kullanılır?
Esnek kaplinler, her biri belirli uygulamalara uygun farklı özellikler ve karakteristikler sunan çeşitli malzemeler kullanılarak üretilir. Malzeme seçimi, uygulamanın gereksinimleri, çevresel koşullar, tork kapasitesi ve istenen esneklik gibi faktörlere bağlıdır. İşte esnek kaplinlerin üretiminde yaygın olarak kullanılan bazı malzemeler:
- Çelik: Çelik, mukavemeti, dayanıklılığı ve mükemmel tork iletim yetenekleri nedeniyle esnek kaplinlerde yaygın olarak kullanılan bir malzemedir. Çelik kaplinler, yüksek tork gereksinimleri ve zorlu çalışma koşullarına sahip ağır hizmet tipi endüstriyel uygulamalar için uygundur.
- Paslanmaz çelik: Paslanmaz çelik, korozyon potansiyeli yüksek ortamlarda esnek bağlantı elemanlarının üretiminde sıklıkla kullanılır. Paslanmaz çelik bağlantı elemanları, pasa ve diğer aşındırıcı unsurlara karşı mükemmel direnç göstererek denizcilik, gıda işleme ve kimya endüstrisi uygulamaları için idealdir.
- Alüminyum: Alüminyum kaplinler hafiftir, düşük atalete sahiptir ve mükemmel denge sağlar. Havacılık ve robotik gibi ağırlığın azaltılmasının kritik olduğu uygulamalarda yaygın olarak kullanılırlar.
- Pirinç: Pirinç bağlantı elemanları, elektriksel iletkenlikleriyle bilinir ve belirli endüstriyel makinelerde veya elektronik ekipmanlarda olduğu gibi elektriksel topraklama veya elektriksel izolasyonun gerekli olduğu uygulamalarda kullanılır.
- Dökme Demir: Dökme demir kaplinler iyi mukavemet ve dayanıklılık sunar ve genellikle şok yüklerine ve titreşimlere karşı direncin gerekli olduğu endüstriyel uygulamalarda kullanılır.
- Plastik/Polimer: Bazı esnek kaplinlerde poliüretan veya naylon gibi yüksek performanslı polimerler veya plastikler kullanılır. Bu malzemeler iyi esneklik, düşük sürtünme ve kimyasallara karşı direnç sağlar. Plastik kaplinler, korozyon direnci ve hafifliğin önemli olduğu uygulamalar için uygundur.
- Elastomerler: Elastomerler, birçok esnek bağlantı elemanında esnek eleman olarak kullanılır. Doğal kauçuk, neopren veya üretan gibi malzemeler, esneklik ve titreşim sönümleme özellikleri sağlayan elastomer örümcek elemanları olarak yaygın olarak kullanılır.
Bağlantı malzemesinin seçimi, uygulamanın özel ihtiyaçlarına bağlıdır. Örneğin, yüksek performanslı ve ağır hizmet uygulamaları, sağlamlıkları nedeniyle çelik veya paslanmaz çelik bağlantı elemanları gerektirebilirken, ağırlık azaltmanın kritik olduğu uygulamalar alüminyum veya polimer bağlantı elemanlarından fayda sağlayabilir. Ayrıca, malzeme seçimi, uygulamanın çalışma ortamındaki sıcaklık aralığı, kimyasal maruziyet ve elektriksel gereksinimler gibi faktörlerden de etkilenir.
Üreticiler genellikle bağlantı elemanları için malzeme özelliklerini belirterek, kullanıcıların uygulamalarının özel gereksinimlerine göre bilinçli kararlar vermelerine yardımcı olurlar.
editor by CX 2023-09-18
