Introduction:
DeShi rubber slurry pump, the wet elements are manufactured of anti-abrasive or anti-corrosive natural rubber, which
can be flawlessly interchangeable with the metal elements. EPTTs JCEP different material components in accordance
to the slurry liquid circumstances, these kinds of as R08, R26, R33, R55, S31, S42, S45, and so on. EPT lined slurry pumps
are far more ideal in delivering high corrosive or abrasive slurries of little particle measurement with no tough
or sharp edges.
EPT EPT Parameters
| Product | Max EPTT (Kw) |
Inlet amp Outlet measurement (inch) | EPT for Wear Components | Circulation Charge (Q) | EPT (H) meter |
Velocity (RPM) |
EPTTeller Dia. (mm) |
|
| m sup3/hr | l/s | |||||||
| 25HS-B | 15 | one.5/1 | M | twelve.6~28.eight | three.5~8 | six~sixty eight | 1200~3800 | 152 |
| R | 10.eight~twenty five.two | 3~7 | seven~fifty two | 1400~3400 | 152 | |||
| 40HS-B | fifteen | two/one.five | M | 32.four~seventy two | nine~twenty | six~58 | 1200~3200 | 184 |
| R | twenty five.two~fifty four | 7~fifteen | five.5~41 | one thousand~2600 | 178 | |||
| 50HS-C | 30 | three/2 | M | 39.6~86.four | eleven~24 | twelve~64 | 1300~2700 | 214 |
| R | 36~seventy five.6 | ten~21 | 13~forty six | 1300~2300 | 213 | |||
| 75HS-C | 30 | 4/3 | M | 86.four~198 | 24~55 | 9~52 | 1000~2200 | 245 |
| R | 79.2~a hundred and eighty | 22~fifty | 5~34.5 | 800~1800 | 245 | |||
| 100HS-D | sixty | 6/four | M | 162~360 | 40~a hundred | twelve~fifty six | 800~1550 | 365 |
| R | a hundred and forty four~324 | 40~ninety | twelve~forty five | 800~1350 | 365 | |||
| 150HS-E | one hundred twenty | eight/six | M | 360~828 | 100~230 | ten~sixty one | five hundred~1140 | 510 |
| R | 324~720 | 90~two hundred | 7~49 | 400~1000 | 510 | |||
| 200MS-E | one hundred twenty | 10/eight | M | 666~1440 | 185~four hundred | 14~sixty | 600~1100 | 549 |
| 200HS-ST | 560 | 10/eight | M | 612~1368 | a hundred and seventy~380 | 11~61 | four hundred~850 | 686 |
| R | 540~1188 | a hundred and fifty~330 | 12~fifty | four hundred~750 | 686 | |||
| 250HS-ST | 560 | 12/ten | M | 936~1980 | 260~550 | 7~sixty eight | 300~800 | 762 |
| R | 720~1620 | two hundred~450 | seven~45 | three hundred~650 | 762 | |||
| 300HS-TU | 560 | fourteen/twelve | M | 1260~2772 | 350~770 | 13~sixty three | 300~600 | 965 |
| R | 1152~2520 | 320~seven-hundred | thirteen~44 | 300~500 | 965 | |||
| 350HS-TU | 1200 | sixteen/14 | M | 1368~3060 | 380~850 | eleven~63 | 250~550 | 1067 |
| 450HS-TU | 1200 | twenty/18 | M | 2520~5400 | seven hundred~1500 | thirteen~fifty seven | two hundred~400 | 1370 |
| 25HHS-C | 30 | 1.five/one | M | sixteen.2~34.two | 4.5~9.5 | 25~92 | 1400~2200 | 330 |
| 50HHS-D | sixty | three/2 | M | sixty eight.four~136.eight | 19~38 | 25~87 | 850~1400 | 457 |
| 75HHS-E | one hundred twenty | four/3 | M | 126~252 | 35~70 | 12~ninety seven | 600~1400 | 508 |
| 100HHS-E | a hundred and twenty | 6/four | M | 324~720 | 90~200 | thirty~118 | 600~one thousand | 711 |
| 150HHS-S | 560 | eight/6 | M | 468-1008 | one hundred thirty~280 | twenty~94 | 500~a thousand | 711 |
For the material of sporting areas,
quotM quot = metal, ultra chromium alloy
quotR quot = anti-abrasive rubber
Comprehensive Functions:
1. Well developed for interchangeable wet elements with steel lined slurry pump.
two. Casing – Casing halves of cast or ductile iron with exterior reinforcing ribs incorporate the wear liners and offer
substantial running strain abilities
three. EPTT assembly – A large diameter shaft with short overhang minimizes deflection and contributes to EPTT
bearing existence. Only 4 by means of bolts are JCEP to maintain the cartridge kind housing in the frame.
four. EPT frame – A rigid, 1-piece casting cradles the quotcartridge quot shaft and bearing assembly. A small
amount of via bolts hold the pump casing to the frame. An easy indicates of external impeller adjustment
is offered in a convenient placement below the bearing housing.
5. EPTTeller – JCEP and rear shrouds have pump-out vanes. This style decreases recirculation and seal
contamination, Elastomer impellers are produced from rubber coated large tensile metal, Cast-in impeller threads
require no impeller insert or nuts.
six. Liners – EPT elastomer liners are interchangeable with tough metallic. The elastomer liners are bolted,
not bonded, to the outer casing. Elastomer seal rings again all liner joints.
7. Shaft seal – EPTT seal,Centrifugal seal, and EPT seal.
eight. Driving kind – FleXiHu (West EPT) Dis.ble coupling,V-belt with pulleys,EPTT,VFD,SCR manage and so on.
nine. The discharge branch can be oriEPTTd to any eigEPTT positions at the interval of 45 degrees
10. EPT to install and maintain in on-internet site software.
Make contact with
Welcome to get in touch with us any time for specifics.
Your inquiry will get our prompt focus and reaction !
