NM50 Flexible Jaw Coupling
Gandingan fleksibel NM50 NM dengan julat lubang 7-19 mm, kelajuan maksimum rujukan 12500 rpm dan tork normal rujukan 1.3 kgf·m.
Lihat butiran →Primary NM Coupling
Gandingan Rahang Fleksibel NM97
Gandingan fleksibel NM97 NM dengan julat lubang 10-42 mm, kelajuan maksimum rujukan 7000 rpm dan tork normal rujukan 10.5 kgf·m.
Bore range10-42 mm
Reference max speed7000 rpm
Reference normal torque10.5 kgfu00b7m
NM97 is an NM flexible coupling size for industrial shaft connections. Its size data gives a first check for bore capacity, operating speed and torque. The finished hubs are machined to the actual shafts, so the driver and driven bores may be different.
NM97 technical specifications
| Parameter | Value | Buyer note |
|---|---|---|
| Bore range | 10-42 mm | Confirm both finished bores independently. |
| Reference max speed | 7000 rpm | Compare with the actual operating speed. |
| Reference normal torque | 10.5 kgf·m | Use with the real machine duty, not as the only selection input. |
Specify both shaft interfaces
The coupling size does not define the finished bore. State the diameter, keyway and fit for Shaft 1 and Shaft 2 separately. If axial space is restricted, include the available hub envelope or an assembly drawing.
Operating information for selection
| Barang | Apa yang perlu disahkan |
|---|---|
| Pemandu | Motor, engine or other driver; include power and operating speed. |
| Peralatan yang dipacu | Pam, pemampat, kotak gear, kipas, pengadun, penghantar atau mesin lain. |
| Duty pattern | Continuous/cyclic service, starts, reversals and shock loading where present. |
| Environment | Unusual heat, contamination, oil/chemical exposure or outdoor conditions. |
| Replacement work | Existing marking, photos and measurable hub dimensions. |
Typical applications
NM couplings are commonly used on pumps, compressors, motor-to-gearbox drives, fans, blowers, mixers, conveyors and general industrial machinery. Application suitability depends on the complete duty and shaft interfaces.
Request a NM97 Quote
Send both shaft dimensions, operating speed, driven equipment and quantity. Include the existing coupling marking or drawing for replacement work.
More NM coupling sizes
NM67 Flexible Jaw Coupling
Gandingan fleksibel NM67 NM dengan julat lubang 8-28 mm, kelajuan maksimum rujukan 10000 rpm dan tork normal rujukan 2.2 kgf·m.
Lihat butiran →
NM82 Flexible Jaw Coupling
Gandingan fleksibel NM82 NM dengan julat lubang 10-32 mm, kelajuan maksimum rujukan 8000 rpm dan tork normal rujukan 5.0 kgf·m.
Lihat butiran →
