A flexible coupling is not permission to ignore alignment. Start with clean shaft and hub interfaces, verify the finished bores and keyways, and align the machines to the equipment maker’s requirements before the coupling is treated as complete.
Before assembly
| Тауар | Нені растау керек |
|---|---|
| Confirm identity | Check model, bore and keyway against the order or equipment drawing. |
| Inspect shafts | Remove burrs and damage that could prevent correct seating. |
| Check axial position | Respect the required hub positions and inter-hub spacing for the selected model/drawing. |
| Align machinery | Use the appropriate alignment method for the machine train. |
| Guard the drive | Install the required rotating-equipment guard before operation. |
After first operation
Listen and inspect for new vibration, rubbing or movement. If a newly installed flexible element shows rapid damage, do not assume the element itself is defective; revisit alignment, duty and hub condition.
NM муфтасының бағасын сұраңыз
Біліктің өлшемдерін, жылдамдығын, жұмыс көлемін және санын жіберіңіз. Бағаны ұсынар алдында біз модель мен өңдеу мәліметтерін қарастырамыз.
